Filters
Articles info
Structurally robust gasket and must be mounted with the interposition of a stop ring that prevents the gasket from moving axially in its seat.
The stop ring must not press the gasket into its seat, but must allow a gap of 0.5 ÷ 1 mm. Furthermore, it is necessary to drill a series of holes in the ring which have the purpose of equally dividing the pressurized fluid on the two sealing lips. These seals can be mounted on both piston and cylinder and can withstand pressures of up to 10 MPa (100 bar).
The stop ring must not press the gasket into its seat, but must allow a gap of 0.5 ÷ 1 mm. Furthermore, it is necessary to drill a series of holes in the ring which have the purpose of equally dividing the pressurized fluid on the two sealing lips. These seals can be mounted on both piston and cylinder and can withstand pressures of up to 10 MPa (100 bar).
Results 1 - 3 of 3
| D | d | H | L | Codice | Select an article |
|---|---|---|---|---|---|
| 30,00 | 20,00 | 5,00 | 5,50 | M5 3020 |
NBR85 Available: Yes |
| 32,00 | 24,00 | 4,00 | 4,50 | M4 3224 |
NBR85 Available: Yes |
| 34,00 | 26,00 | 4,00 | 4,50 | M4 3426 |
NBR85 Available: Yes |
Results 1 - 3 of 3